Check out the video above or step by step guide below for assistance in this repair

iFixit Samsung Galaxy Note 8 Back Cover Replacement Guide

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• Dottorpod iFlex Metal Opening Tool
• Dottorpod iPlastix Opening Tool
• colomastudios 5 piece opening picks
• Black Spudger
• uFix iOpener Heat bag
• Heat Gun

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+39)0872792528) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal
• Be careful not to push an opening tool too far past the adhesive, the wireless coil is easily pierced or sliced
• The fingerprint scanner is attached to the glass and is plugged into the main board, be careful not to full open the glass until that is unplugged